StormSaver Rainwater Harvesting

The StormSaver rainwater harvesting system is used to collect rainwater to be reused around the home for flushing toilets, supplying washing machines and outside taps. This process is environmentally friendly and creates a saving on costly water bills.

Related documents System Features Specifications

Uses over 75% less energy than other traditionally pumped Rainwater Harvesting systems, by using clever suction technology.

● Low decibel rating.

● Flow Rate of 10 litres per minute (same as mains pressure).

● Compact control unit, which can easily fit into either a kitchen cupboard, or be located in a utility room or garage.

● Cost effective solution to reuse rainwater effectively.

● The shallow dig tank is robust and comes with all the necessary components such as integral filtration, overflow siphon and inlet calmer pre-fitted for ease of installation.

● Ideal for new build properties and homes with up to 6 bedrooms.

BS 8515:2009+A1:2013: Rainwater harvesting systems

 

Product Code Colours

Stormsaver Packages
1500 Litres S1500
3000 Litres S3000
5000 Litres S5000
7500 Litres S7500

Pedestrian Duty Lid
PDL1

Entrance Shaft
635mm ES635
235mm ES235

Control Panel
CP1

Boosted Floating Suction Filter Kit (Half Inch)
FK1

Flexible Suction Hose (Half Inch)
20m H20
40m H40

Level Sensor
LS1

Identification Tape and Label Pack
ID1

110mm Non-Return Valve – Single Flap
D550

Product Drawings (BIM/CAD/PDF)

You can download accurate CAD drawings and BIM Models/Families of our products from our FloPlast CAD & BIM library.To access the library you must register using the form below. You will then be sent an email which contains your access link giving you full access to the Fastrack CAD & BIM Library.