MDPE Pipe

Polyethylene blue PE80 pipe has been tested to 12bar and is available in outside diameters of 20mm, 25mm, & 32mm with 50mm & 63mm sizes available to special order. This plain ended coil is suitable for use below ground on cold water services.

Related documents System Features Specifications

MDPE Pipe

● Excellent pressure resistance, tested to 16 BAR. Comfortably exceeds the performance requirements of UK Water Byelaws Scheme. Tested and approved by various testing institutes worldwide. Water Regulations Advisory Scheme Approved (WRAS) product. (20mm to 110mm range of fittings)

● No need to dismantle the connector in order to fit the pipe.

● No need to chamfer the pipe, pieces will not be lost on the job site.

● No time wasted; just cut the pipe, insert, pipe liner, lubricate the seal, undo the nut a few turns, push the pipe in as far as it will go, tighten the nut and it’s done!

● Pressure Ratings for Medium Density (PE80) Polyethylene Pipe:

Normal SDR RAR
O/D mm Rating Rating
20 9 16
25 11 12.5
32 11 12.5
40 11 12.5
50 11 12.5
63 11 12.5

BS EN 12201 – 2 Plastic piping systems for water supply. Polyethylene (PE.

Kitemark: KM82327.

Kitemarked and KIWA approved.

Product Code Colours

25m MDPE Pipe Coil
20mm 111601
25mm 112601
32mm 113601
50mm 115601
63mm 116601

50m MDPE Pipe Coil
20mm 111602
25mm 112602
32mm 113602
50mm 115602
63mm 116602

100m MDPE Pipe Coil
20mm 111603
25mm 112603
32mm 113603
50mm 115603
63mm 116603

150m MDPE Pipe Coil
20mm 111604
25mm 112604
32mm 113604
50mm 115604
63mm 116604

Product Drawings (BIM/CAD/PDF)

You can download accurate CAD drawings and BIM Models/Families of our products from our FloPlast CAD & BIM library.To access the library you must register using the form below. You will then be sent an email which contains your access link giving you full access to the Fastrack CAD & BIM Library.